ViCare registration results in E10 / E12 error
Applies to: Multiple series of Vitodens 100/200 (details below)
The information in this bulletin is intended exclusively for licensed heating contractors, and is NOT intended for the end user. This material is NOT intended to take the place of the information contained in the manuals shipped with the product.
Use of this information by unqualified personnel may result in property damage, personal injury or death.
End users are asked to contact a qualified contractor for all installation and service work. If you need assistance finding a contractor in your area, contact your Viessmann Sales Representative, or use our Contractor Locator.
By hitting "Yes" below you confirm that you have read, understood and agree to this warning, that you are licensed and hold the current, appropriate licences to work on said equipment in the location and/or jurisdiction of installation.
◾ Vitodens 100-W, B1HE / B1KE Series (all models)
◾ Vitodens 200-W, B2HE Series (all models)
E10 or E12 error occurs when a user tries to register their boiler with the ViCare app.
A number of Telemetry Control Units (TCUs) which are used in Vitodens 100 and Vitodens 200 series boilers were manufactured with firmware that contains an invalid certificate.
When the registration process takes place, ViCare passes Wi-Fi credentials to the TCU and instructs it to connect to the Viessmann cloud (the back-end service). ViCare then also connects to the Viessmann cloud and waits for the TCU to check in.
Because the TCU has a bad certificate, the connection to the cloud server is rejected. Instead, it's directed to a "recovery server" or "zero-series update server" which tells the TCU to update it's firmware. This update process can take anywhere from 60 to 90 minutes.
Once updated, the TCU can connect to the back-end server. However, the registration process has already been interrupted by a time-out, and this results in an E10 or E12 error.
After the user receives error E10 or E12 in ViCare, they will need to wait a minimum of 90 minutes while the firmware on the TCU gets updated.
After this time, the user can try registering the boiler in ViCare again, and the process should work now that the firmware has been updated.
- Viessmann Technical Services
- Bulletin ID:
- Date issued:
January 25, 2024
- Updated on:
January 25, 2024
- Revision #: